For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.gpx.com
Customer Service:
1-888-999-4215
Copyright © 2011 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
1. Open the
CD Door
.
2. Place a CD into the boombox, label side
facing up.
3. Close the
CD Door
.
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the
3.5mm Audio Input
and the audio output
on an MP3 player or other audio device.
2. Adjust the
CD/Line In, Off, FM, AM
switch to CD/line In mode.
3. Use the native controls on the connected
MP3 player or other audio source to play
your audio through the boombox.
When not in use, make sure to disconnect
the 3.5mm audio cable (not included).
CD
3.5 mm Audio input
Radio
Loading a CD
1. Follow the instructions for Loading a CD.
2. Adjust the
CD/Line In, Off, FM, AM
switch to CD.
3. Press the
Play/Pause
button to begin
playing the loaded CD.
Playing a CD
Using the Audio Input
1. Adjust the
CD/Line In, Off, FM, AM
switch to AM or FM radio mode.
2. Adjust the
Tuning
dial to tune the radio.
Playing the Radio
Adjust the position of the
Telescopic FM
Antenna
to improve FM radio reception.
An AM antenna is built into the clock radio. To
improve AM radio reception, adjust the position
of the clock radio.
Radio Reception
To download this User’s Guide in English, Spanish,
or French, or to get answers to frequently
asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes,
visite la sección de apoyo en
www.gpx.com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance sur
www.gpx.com
International Support
1. Follow the instructions for Loading a CD
and Playing a CD.
2. Press the
Stop
button to stop the CD
during play.
3. Press the
Program
button.
“01” will begin to blink on the display.
4. Press the
Skip/Search
buttons to select
a track.
5. Press the
Program
button to save the
selected track to the program.
6. Repeat steps 4 and 5 to program up to 20
tracks.
Programming a CD
