manualshive.com logo in svg

GPS PS-2, Installation, Operation & Maintenance Manual

Introducing the GPS PS-2, a cutting-edge navigation system that revolutionizes your travel experience. Ensure a seamless journey with our comprehensive "Installation, Operation & Maintenance Manual" available for immediate "download" - absolutely "free"! Access this essential "manual" from manualshive.com, empowering you to maximize the potential of your GPS PS-2.

Share
Download
background image

Remove Top Cover

Lift top cover straight up to remove as shown.

Step 2.

·

PS-2

24V DC

OUTPUT

L

INP
UT 120-277 VAC

G

N

RLY1

RLY2

[ -]

[+]

RLY1

RLY2

RELAY

Wiring

NOTE:

 Metallic conduit shall be properly bonded in accor

dance with the national electric code article 250.

Connect the appropriate conduit and fitting as necessary for 

the application.

Route the wires as shown and make connections according to the marking located on the product. 

Tighten the fittings to adequately secure the cable and conduit.

Step 3.

·

·
·

For installations in plenum spaces use only metallic clad conduit on incoming AC power.

Wire colors will vary by incoming AC power and GPS product.

Summary of Contents for PS-2









Reviews:

No comments

Related manuals for PS-2

Brands by name

Popular brands

Load more brands