www.globalplasmasolutions.com
Thank you for purchasing a GPS-iDETECT-P™ from Global Plasma Solutions (GPS®). The
GPS-iDETECT-P is a revolutionary product in the air purification industry. The GPS-iDETECT-P is
a plenum mounted ionization detector that confirms the output from the GPS-iMOD® System.
SPECIFICATIONS
• Voltage Input: 18-260VAC Universal Range
• Power Required: 5VA Detecting, 2VA Standby (non-detecting)
• Alarm Contact: 24-220VAC, 0.5A relay with NO, NC and C terminals
• Dimensions: 1” diameter and 10” long
• Wiring Required: 300V, 18/4, plenum rated, SHIELDED, solid strand – provided and installed
by others
• LED Status: Power On – Green LED, Detecting – Blue LED, both are seen from end opposite
power entry
MECHANCIAL INSTALLATION
Mount the GPS-iDETECT-P to the GPS-iMOD bar using the included 1” coated pipe clamp and
secure it to a GPS-iMOD section using a nut and bolt as shown in
FIGURE 1. The sensor should
be as close as possible to the ionization source.
WIRING DIAGRAM
Figure 1
Power On - Green LED
Ion Sensing - Blue LED
Figure 2
