11
response information or ‘&770&PASSWORD ER&&’ if the password is wrong.
①
Send command to the terminal.
②
The terminal return confirmation message to the mobile phone.
9. Set User name Command
SMS Command Format: #801#4~20-digit letters or numbers #4-digit password ##
Example: #801#13900139000#0000##
Notes: After executing this command, the user name of the terminal on GPRS mode is required to be set up
according to actual demand. After the setup is successful, the terminal will send reply with ‘&801&successful
setting&&’ or ‘&801&PASSWORD ER&&’ if the password is wrong.
10. Set APN Command
Create the SMS “802#APN letters or digits, 4-20 bits # Log user name letters or digits 4-20 bits in # Log password
letter or digits 4-20 bits in # terminal password 4 bits ##” and send it to the terminal; after executing this command,
the terminal will automatically restart and connect to GPRS with APN set.
Command example 1: #802#cmnet###0000##
Command example 2: #802#CCDLEN#QIUXIA.21#RX0000#0000##
After this command is executed, APN will be CCDLEN; the login user name is QIUXIA.21 and login password is
RX0000.
Note: The default APN of this product is CMNET.
11. Setup of Server Address
Command Format: #803# Fixed IP address# port number#4-digit password##
This command is used to set GPRS center server address, which could be fixed IP number, like IP1, IP2, IP3,
IP4……as well as domain name with the length less than 64. After the setup is successful, the module will send
a reply with ‘&803&successful setting&&’ or ‘&803&PASSWORD ER&&’ if the password is wrong.
Example: #803#222.73.173.204#7003#0000##
