GPS Tracker PST-AVL01, Installation And Operation Manual

Page: 15 / 23

Page 15 of 23
III More Professional SMS Instruction
****** is user password , and init password is 000000
SMS Instruction Format Note
1 Request one position W ****** ,000
2 Modify user password W ****** ,001,###### ****** is old password
###### is new password
3 Set the time internal of
position refresh W ****** ,002, XXX XXX( 3 digital)
=000,stop
=[1,999] time internal (unit: mins)
4 Set a preset phone number for
SOS button
When this button is pressed,
PST-AVL01 will dial the preset
number. W ****** ,003, 1 , 1 , TelNumber
TelNumber : Preset Tel number
(TelNumber must <16 digits )
5 Set low power alarm
When the PST-AVL01 voltage
is lower than the preset value,
PST-AVL01 will send one
lower power alarm SMS to the
SOS preset number.
W ****** ,004,X X (voltage preset value)
=0 , close
=1, <3.3V send SMS alarm
=2 , <3.4V send SMS alarm
=3 , <3.5V send SMS alarm
(default )
=4 , <3.6V send SMS alarm
=5 , <3.7V send SMS alarm
5 Set over speed alarm
When the PST-AVL01 speed
higher than the preset value,
PST-AVL01 will send one over
speed alarm SMS to the SOS
preset number.
W ****** ,005,XX XX (the speed preset value)
=00 , close
=[01<XX<20] (unit: 10Km)
6 Set Geo-fence alarm
When the PST-AVL01 move
out preset scope, PST-AVL01
will send one Geo-fence SMS
to the SOS preset number.
W ****** ,006,XX
XX ( preset distance to original
place )
=00 close
=01 30m
=02 50m
=03 100m
=04 200m
=05 300m
=06 500m
=07 1000m
=08 2000m
8 Extend setting
(note:
Please use this instruction
carefully) W ****** ,008,ABCDEFG###
A
=0 , Close position report
function
which get position SMS
by Calling PST-AVL01
A =1 , Open position report
function
which get position SMS