GPRINTER GP-9034T, User Manual

Page: 10 / 19

Installation
(a.) Cable connection
1. Please put the printer on the stable surface.
2. Make sure printer power is turned off, please do not plug
the power cable when the printer power is turned on.
3. Connect serial or USB or Parallel or Ethernet cable to
printer and PC.
4. Connect power plug to power supply socket.
<Picture 6>
(b.) Ribbon installation
3. Press the Push button to open print head.
1. Press two press buttons on left and right side to open printer
top cover.
2. Put empty paper tube into ribbon take-up hub if you buy new
ribbon which one side is no contact with paper tube.
After that, install ribbon take-up hub left side and right side
onto printer.
Remark: Factory standard ribbon two sides already fixed well
on paper tube. Go ahead to step 3 instead of step 2.
4. Insert black ribbon supply hub into new ribbon. Then install
ribbon and supply hub from left side to right side, refer to
picture.
5. If install factory supplied new ribbon, please refer to step 2: in
stall ribbon and ribbon take-up hub.
If you buy and use new ribbon, firstly you roll up the ribbon
onto the empty paper tube.
After that please adjust the big blue gear according to the
direction of arrows to let ribbon touch the take-up hub flatly
and smoothly without wrinkle.
6. Close the print head by pressing two arrow locations,
Confirm print head two sides are closed correctly to ensure
you get printing in good quality.
5.
9