GPO PCD299, User Manual

Page: 13 / 64

13
8. In order to remove a CD, please press the “STOP” button, open the
CD compartment and lift the CD out carefully.
Always keep the CD door closed.
NOTE:
If a disc is inserted the wrong way around, respectively if no
disc is inserted, then “No“ appears on the display.
Programmed Play
This can be used to program any desired sequence of tracks.
Up to 20 tracks for CD can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button.
3. Press the “PROGRAM” button again to confirm desired track into the
program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program
memory.
5. When all the desired tracks have been programmed, press the
“PLAY / PAUSE” button to play the disc in the order you have
programmed.
6. Press the “STOP” button twice to terminate programmed playback.