GPO Display PA12H, User Manual

Page: 16 / 16

User manual
www.gpodisplay.com Panoramic Display
16
OSD Structure
ITEM Sub Menu Description Value
Picture
Brightness Adjust the backlight level of screen 50(0~100)
Contrast Increase/ decrease picture contrast 50(0~100)
Sharpness Control the clarity of details of pictures 2(0 ~ 4)
H Position Adjust picture horizontal position 50(0~100)
RGB ONLY
V Position Adjust picture vertical position 50(0~100)
Clock Adjust picture width 50(0~100)
Phase Adjust picture focus quality 30(0~100)
Color
Color Status Management Select the color of picture mode
User(User,Warm,Normal,
Cool)
Red Adjust color of red rate 50(0~100)
RGB ONLY
Green Adjust color of green rate 50(0~100)
Blue Adjust color of blue rate 50(0~100)
Auto Color Auto color calibration To Start
OSD
Language Select OSD menu language English
H Position Adjust the OSD horizontal position 50(0~100)
V Position Adjust the OSD vertical position 50(0~100)
Transparency Select the transparency of the OSD 33 (0~100)
OSD Time Adjust the OSD menu timeout 10(3~30)
SETUP
Source Select the input signal Source RGB, HDMI, AUTO
Factory reset Reset to factory settings To Start
Aspect On/ Off the fit to screen Off(On/Off)
Backlight DIM On/ Off the backlight Dimming(PWM) Off(On/Off)
Set ID On/ Off the RS232 control Off(On/Off) Optional
Volume Adjust the audio volume 62(0~100)
Mute On/ Off the audio output Off(On/Off)