background image

06/16

Rev. -   922124-01

TABLE OF CONTENTS

General Information ....................................................2
Safety Instructions ......................................................2
Installation ..................................................................2
Operation ....................................................................4
Maintenance ...............................................................4
Repair .........................................................................4
Troubleshooting ..........................................................8

Specifications

 .............................................................9

Illustrated Parts List ..................................................10
Parts and Service .....................................................11

Great Plains Industries, Inc. is a member of

the Petroleum Equipment Institute.

To the owner...

Congratulations on receiving your GPI fuel pump. We are pleased 

to provide you with a system designed to give you maximum 

reliability and efficiency.

Your fuel pump is designed, tested, and approved for use with 

gasoline blends, diesel fuel blends and kerosene. Please take 

all due precautions when handling these flammable liquids. Your 

safety is important to us. 
Also, to assure the longest possible service life, it is important that 

you follow the operation and maintenance procedures outlined in 

this manual. We are proud to provide you with a  quality  product  

and  dedicated  support. Together with your conscientious use, 

we are sure that you will obtain years of safe, dependable service.

Victor Lukic, President

Great Plains Industries, Inc.

M-150S-EM & M-150S-EA FUEL PUMP

OWNER’S MANUAL

DO NOT RETURN THIS  

PRODUCT TO THE STORE!

Please contact

Great Plains Industries, Inc. 

before returning any product. 

If you are missing parts, or 

experience problems with 

your installation, contact our  

Customer Support 

Department

. We will be 

happy to assist you. 

800-835-0113

316-686-7361 

or 

email: 

[email protected]

Check out the 

Great Plains Industries, Inc. YouTube

 

channel to see Installation and Troubleshooting videos 

for the M-150S Fuel Transfer Pump.

Summary of Contents for M-150S-EM









Reviews: