background image

Rev. A  922029-01

1

TABLE  OF  CONTENTS

General Information ...............................................................2
Safety Instructions .................................................................2
Installation .............................................................................2
Operation ...............................................................................3
Maintenance ..........................................................................3
Troubleshooting .....................................................................4
Viscosity Charts .....................................................................5
Illustrated Parts Drawing .......................................................6
Specifications ........................................................................7
Service ...................................................................................7

Great Plains Industries, Inc. is a member of

the Petroleum Equipment Institute.

SAVE THESE INSTRUCTIONS

03/08

To the owner...

Congratulations on receiving your GPI oil pump. We are pleased 

to provide you with a system designed to give you maximum 

reliability and efficiency.

Your pump is designed for use with motor oil, gear oil, hydraulic 

oil and waste oil. If used with antifreeze, do not exceed 50% 

water. Please take all due precautions when handling these 

liquids. Your safety is important to us. 

Also, to assure the longest possible service life, it is important 

that  you  follow  the  operation  and  maintenance  procedures 

outlined in this manual. We are proud to provide you with a  

quality  product  and  dedicated  support. Together with your 

conscientious use, we are sure that you will obtain years of 

safe, dependable service.

President

Great Plains Industries, Inc.

Oil Pump

Models L 5016, L 5116 

and

 L 5132

Owner’s Manual

Please contact GPI before returning any product. If 

you are missing parts or experience problems with 

your installation, our Customer Support Department 

will be happy to assist you.

GPI Customer Support

800-835-0113  or  316-686-7361

S T O P

DO NOT RETURN THIS 

PRODUCT TO THE STORE!

5252 East 36th Street North

Wichita, KS USA  67220-3205

TEL: 316-686-7361

FAX: 316-686-6746

“A Great Plains Ventures Subsidiary”

www.gpi.net

1-800-835-0113

Summary of Contents for L 5016









Reviews: