7. Operation
Power On:
If using the battery, connect it to the main unit instead of the AC adapter.
Battery
DC power cord
Flip the switch on the battery to the “on” position, and make sure the
battery is fully charged. A full charge on the battery is indicated by four
green lights at the top. If the battery is not fully charged, turn it on,
connect it to the AC adapter, and then connect the adapter to a suitable
power supply. (See 10. battery charge “Page 26”)
If using the battery, remove the battery from the casing, and place on a hard,
open surface to prevent overheating.
DISCONTINUE USE IMMEDIATELY if battery is dropped or otherwise damaged
Page 18-1
