Maintenance and Adjustment
Cleaning
-
Pay attention not to make scratches when cleaning the headlight and those plastic parts. Avoid
using high-pressure water spray where seals and electric components are, water seepage can cause
damage.
Make sure not to spray water to clean the following delicate parts : airbox, ECU, brakes, all electric
connectors, muffler hole, fuel tank cap.
-
First, rinse away the dust and remove dirts with water.
-
Mix the cleaning agent and water to the proportion, use soft clean cloth or sponge to gently rub
the bike.
-
Rince off with soft- or foggy-spray of clean water
-
Wipe with soft cloth to dry and see if all dirt is gone
-
Air blower is not recommended to dry your bike, it may cause flaws to the paint finished
-
Restart the engine at and run idle speed to warm up
-
Ride slowly after washing. Check both brakes by squeezing front and stamping rear brakes several
times to help dry the pads.
34
Summary of Contents for GPX Demon 150GN
Page 43: ...Notes...
Page 44: ...Notes...
