Gozney Dome Stand Technical Manual Download Page 3

5

4

Cautions & Warnings

Gas Oven

Always disconnect the oven from the 
gas supply before moving the oven.

The casters should always be locked 
when the oven is connected to a gas 
supply, even if the oven isn’t in use. 

Ensure you’re using a Gozney supplied  
gas connector or one that complies 
with the Standard for movable gas 
appliances (ANSI Z21.69 / CSA 6.16), 
and a quick-disconnect device that 
complies with the relevant Standards 
(ANSI Z21.41 / CSA 6.9).

The gas connector and the quick 
disconnect device or its associated 
piping  should never be used to limit 
the movement of the appliance.

Ensure you have fully read, understood  
and comply with the cautions & warnings 
in the Dome Users Manual supplied with 
the oven.

All four of the casters should always be 
locked unless you are moving the oven.

Never attempt to move the oven when it 
is still warm, wait for it to fully cool first.

When moving the oven on the stand 
always push/pull from the stand and 
not the oven. 

Remove anything loose from the stand 
and its shelves before moving it.

Placing hot items from the oven onto 
the wooden shelves may damage them, 
use appropriate protection to avoid 
damage.

Summary of Contents for Dome Stand















Reviews: