GoWISE USA GW22503, Instruction Manual

Page: 9 / 20

9
Using Your Blender
1. Ensure that the ON/OFF switch is in the OFF position.
Plug the unit into a household power outlet. Make sure
the blender sits on a level and dry surface, moisture may
result in the blender moving during operation.
2. Place the pitcher onto the motor base correctly. You may
need to rotate the pitcher so that the connection aligns
correctly.
3. Add desired ingredients. Do not fill above the maximum
level.
4. Press the lid firmly onto the pitcher. Place lid cover then
twist to lock the lid cover.
5. Check and ensure that the speed dial is set to MIN.
6. Flip the ON/OFF switch to ON to turn the blender on. The
blender will beep to indicate whether it is on. The motor
will gradually accelerate to the set speed.
NOTE:
You may notice a slight odor from the blender motor during
the first use. This is normal and expected when the motor is being
used for the first time.
WARNING: Do not leave the blender unattended during operation.
7. Adjust the speed dial to the desired setting and blend
ingredients for the required time. NOTE: The speed of the
blender will reduce slightly after 30 seconds of operation
and then return to the set speed. This improves the
blending performance by briefly reducing the rotation
speed of the blade assembly. This allows the ingredients
to settle closer to the blades for optimal mixing.
WARNING:
Do not place any body parts or foreign objects in the
blender while it is in use. The blades are very sharp and can cause
serious injury.