06
GoVision User Guide
A.ON/OFF
Press the on/off button to turn GoVision on and the LED light indicator will
turn red. GoVision will automatically enter video record mode once the
glasses have been tuned on and the red light begins to flash. To power off
the glasses, hold down the on/off button for 3 seconds. The glasses will
automatically save the video file and shut down.
B.RECORDING VIDEO
Power on the glasses by pressing the on/off button. Once powered on the
glasses automatically enter into video record mode. To stop recording, press
the on/off button.The LED light indicator will stop flashing and turn solid red.
The system will automatically save video files in 10 minutes increments.
In order to ensure good sound quality, make sure you do not block the
microphone. The glasses have a 2 minute shut off when not in record mode.
C.TAKING PICTURES
When the glasses are powered on, stop the video recording by pressing the
on/off button. The glasses will enter into camera mode when the LED light
indicator is solid red. Press the camera button once to take pictures and save
images. The glasses have a 2 minutes shut off if a picture is not taken within
this time frame.
•
Note: Make sure there is adequate light when taking pictures and the
glasses are upright and stable.
D.FILE UPLOADS
Connect the GoVision Sunglasses with the USB cable to a proper computer
USB port. The glasses will be recognized as a Removable Disk Drive. All the
GoVision files can be accessed in the file folder DCIM.
•
Note: Please allow time for your computer to discover the glasses
USB cable in the removable disk drive when looking to view video
and photo files. If the USB cable is not identified after 2 minutes,
ensure the 8-Pin end of the cable is properly secured to the glasses,
then remove the USB cable and re-insert all the way into the computer.
E.CHARGING
Connect glasses to computer by USB cable to charge battery. The red light will
flash during the charging process. Glasses are fully charged when the red light is
illuminated solid red and no longer flashing. It will take up to 3 hours to obtain a full
charge, A high capacity lithium polymer battery powers GoVision. Please make sure
your GoVision’s are fully charged before use.
GoVision User Guide
07
USER GUIDE
Summary of Contents for Pro 2
Page 1: ...User Guide ...