Press “ ” button to confirm your setting, the Minute will start to flash, and then press
the “
▲
” and “
▼
” buttons to set the required minute.
Press “ ” button to confirm your setting, the snooze time will start to flash, and then
press the “
▲
” and “
▼
” buttons to set the required snooze minute.
Press “ ” button to confirm your setting and end the alarm setting procedure.
●
●
●
Note
※
※
※
※
After 20 seconds without pressing any button the clock will switches automatically from
setting mode to normal clock mode.
The alarm will beep for 2 minutes if you did not deactivate it by pressing any button. In
this case the alarm will be repeated automatically after 24 hours.
The volume of rising alarm sound (crescendo, duration: 2 minutes) will change 4 times
whilst the alarm signal is heard.
The snooze time setting range is 5 ~ 60mins. When you set it to OFF, it indicates no
snooze function.
Snooze Function
When the snooze function is set to OFF, the snooze function will not be triggered when
you touch or press “ ”.
When the snooze function is set to On, touch the “ ” field will enter snooze mode.
After the snooze time you set, the alarm will beep again.
In snooze mode, press any button except the “ ” button or press and hold the “ ”
button for 2 seconds after the alarming to exit the snooze mode.
●
●
●
The weather station has a display which automatically shows the current moon phase.
Moon Phases
New
moon
Half-
moon
Full
moon
Half-
moon
Waxing half-
moon
Waxing full
moon
Waning full
moon
Waning half-
moon
Indoor comfort level is calculated according
to the indoor temperature and humidity,
a total of 5 levels.
Comfort display
Comfortable too cold or too hot
06