5
Adding GoVapor E-Liquid to Your Clearomizer:
1. Remove the rubber mouthpiece cover. Then twist the
mouthpiece cap counter clockwise and pull to remove. Set your
mouthpiece aside while refilling your clearomizer tank.
2. While holding the clearomizer, slightly tilt it at a 30-degree
angle and take a look inside. The tiny hole in the center is for air
intake and should be avoided when adding e-liquid to the
clearomizer. Carefully and slowly drip the e-liquid along the
chamber wall to avoid the central air-intake hole. When refilling
your clearomizer, do not exceed 1.6ml fill line marked on the
side of the clearomizer.
3. Reattach the mouthpiece to the clearomizer by screwing it
on in a clockwise direction until secure. It is now ready for use.
*Keep out of reach of small children.
In case of contact with eyes or skin, rinse thoroughly with water.
If ingested seek medical attention. Store in cool, dry location.
