8 x
Govaerts Recycling NV | Kolmenstraat 1324 | B-3570 Alken | [email protected] | www.govaplast.com
2
Installation
The Board GP44 is delivered fully assembled. It is to be fixed onto a
wall using the 8 included nail plugs. Position the board on the wall,
mark the 8 anchorage points (board is pre-drilled) and drill the holes in
the wall using a 8 mm stone drill bit. Then fix the nail plugs into the wall.
Important suggestion
To drill the holes in the ground, use a sharp drill and just put the plastic
plug into the hole. It is better to screw the nail into the plug than to
hammer. This way, you don't damage the head of the nail and unfixing
will be easy.
