ASSEMBL
Y & USAGE
Assembly and Usage
Assembly and Usage
10
11
Note: Prior to the first use, you should use hot water and mild
detergent to clean the aluminum bowl and top lid of the ice cream
maker.
1. Insert the mixing motor into the top of the lid and push down
to lock in place.
2. Attach the paddle to the bottom of the mixing motor and push
it in to lock it in place.
3. Add the ice cream ingredients to the mixing bowl and stir
gently to mix together.
4. Place the lid on top of the bowl with the paddle inside the
bowl. The arm of the mixing motor should be placed just to the
right of the nodes.
Note: The machine will not function if the lid is not aligned properly
with the nodes.
5. Rotate the Lid clockwise until it drops down slightly, slides into
place and locks.
6. Connect the input connector clip of the power adaptor into the
ice cream maker, and then insert the power plug into the
power socket.
Important: Make sure the power socket is 100~240 V 50/60Hz AC.
7. Press the desired ice cream consistency on the Control Panel,
either Hard or Soft. The machine begins churning and will stop
once the desired consistency is reached.
8. When the process is complete, unplug the ice cream maker,
turn the lid counter-clockwise and remove the lid from the
machine.
9. Scoop the ice cream into a separate bowl.
Note: It is recommended that you place the bowl in the freezer for
about 30 minutes to allow the ice cream to firm up.
