8
9
USING Y
OUR
KET
TLE
Using Your Kettle
Setting up the Kettle:
• Set the base on a flat, even and steady surface.
• Remove the kettle from the base.
Place the waterproof cover on
top of base.
• Take off the lid.
• Fill the kettle with cold water.
Do not fill over the max
marking. See the water level
for adding the
desired amount of wtaer.
• After filling the kettle with water,
insert the lid into the kettle with
holes facing towards the handle.
• Plug the power cord into a standard
wall outlet .
• Put the kettle firmly on the base
and press the power button on, the
power indicator light will appear, and
the display temperature flashes for 3
seconds .
Selecting the preset shut off temperatures:
• Press the shut off temperature set button until your
desired preset Shut off temperature is displayed.
Note: The appliance preset temperatures are:
140ºF (60ºC), 176ºF (80ºC), 185ºF (85ºC),
190ºF (88ºC), 205ºF (96ºC) and 208ºF (98ºC)
• The appliance default temperature is 185º F (85ºC)
Note: once you have set the shut off temperture it is stored in memory and will
be recalled whenever you turn on the kettle. No need to set it every time unless
you want to change the shut off temperature.
Note: During the heating cycle the LED display shows the current water tempera-
ture.
Note: After the set temperature is reached the heater will shut off. The display will
continue showing the water temperature for up to 1 hour if the kettle was NOT
removed from the base.
Note: If the kettle is removed from the base
during a heating cycle, the heating cycle
and Power On indicator light shuts off, and
the LED display will show “0 00”.
When the kettle is returned to base
the display will show the current
water temperature for
7 minutes and then shut off.
Note: To manually stop the boiling process,
press the on/off button at any time.
The heater and LED lights will shut off.
USING Y
OUR
KET
TLE
9
ºTemp
Set
on/off
ºF/ºC
hold
ºTemp
Set
on/off
ºF/ºC
hold
ºF
Selecting the display temperature scale,
Fahrenheit or Celsius:
• Press the ºF/ºC button to display the temperature in
Fahrenheit or Celsius when power on.
Setting the shut off Temperature:
Manual setting shut off temperature:
• Press the shut off button, the temperature will flash on the display.
• Press the + or - button to select shut off temperature.
• Once the display stops flashing the temperature is set and the display shows
current water temperature.
Waterproof
Cover
ºF
ºTemp
Set
on/off
ºF/ºC
hold
