15
EN
Risk of electric shock and
fi
re
■
Only use the device in enclosed areas.
■
Always place the device on a dry, level and solid base.
■
Keep a suf
fi
cient distance from other heat sources, e.g. hobs or
ovens.
■
Never cover the device with cloths or the like. Danger of over-
heating!
■
The device should never be set up when highly
fl
ammable ma-
terials are nearby (curtains, textiles, etc.).
■
Do not place any
fl
ammable materials such as paper, cardboard
or plastic in or on the device.
■
Never submerge the motor unit in water or other liquids! Make
sure that the motor unit, the cord or the plug can not fall in water
or get wet.
■
If the motor unit falls in water, immediately disconnect the power
supply.
■
Never touch the motor unit, the cord or the plug with wet hands.
■
Only connect the device to a socket, which has been proper-
ly installed and complies with the device’s technical data (see
chapter “Technical data”).
■
Lay the cord such that it is not crushed or creased and such that
it does not come into contact with hot surfaces.
■
Pull the mains plug out of the socket if you do not use the de-
vice, before you clean the motor unit, if a defect occurs while in
use or before a storm.
■
If you want to remove the mains plug from the socket, never pull
on the cable, but always on the plug.
Beware of damage to the device and property
■
Check the device for damages prior to each use. The device
must not be used if the motor unit, the accessories, the mains
cord or plug exhibit visible damages. Do not attempt to repair
the device or replace the cable and/or plug yourself. Only have
the device, cord and plug repaired by a quali
fi
ed workshop! In the
event of damage, promptly contact the customer service depart-
ment.
09833_de-en-fr-nl_A5_V1.indb 15
09833_de-en-fr-nl_A5_V1.indb 15
20.11.2015 12:25:43
20.11.2015 12:25:43
