17
EN
Clean the device immediately after every use to prevent the formation of germs. Do not
allow any food residues to dry on.
1. Make sure that the device has completely cooled down and has been disconnected
from the mains power!
2. Carefully remove any crumbs and residues from the plates. Use a soft brush to do
this if necessary.
3. Clean the plates with a wet sponge and a little mild detergent.
4. Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to
remove more intense soiling.
5. Then dry off the housing with a soft cloth.
6. Store the device in a dry, clean, frost-free place that is protected from direct sunlight
and cannot be accessed by children or animals
.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps listed, contact the customer
service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
The device does not
work. The operating
lamp (
1
) does not
light up.
The mains plug is not in-
serted correctly in the plug
socket.
Plug in the mains plug.
The plug socket is defective.
Try another plug
socket.
There is no mains voltage.
Check the fuse of the mains
connection.
The fuse in the fuse
box is triggered.
Too many devices connected
to the same circuit.
Reduce the number of
devices in the circuit.
During use, an
unpleasant smell is
detected.
The device is dirty.
Follow the instructions in
the “Cleaning and Storage”
chapter.
The device is being used for
the fi rst time.
A smell often develops when
new devices are fi rst used.
The smell should disappear
once the device has been
used several times.
