3
Safety
General
The machine is provided with safeguards where necessary. Make sure every person who comes in contact
with the machine, or enters the area around it, wears adequate personal protection (overalls, safety
glasses, ear protectors, helmet, steel-toed safety shoes etc.). Areas of the machine considered dangerous
are marked with warning pictograms.
If the machine remains easily accessible to persons, extra safety precautions (e.g. safeguards) must be
installed. When safeguards are not possible, make sure clear instructions are given to people using the
machine.
Safety regulations
•
Read and observe the warnings and
instructions given on stickers and labels on
the Cleanflow.
Do not ignore them.
They are applied for your safety!
•
Goudsmit recommends a maximum lifting
weight of 23 kg per person.
For the heavier components use a lifting
machine or ask a colleague to assist.
•
The activities described in this manual can
only be done by trained, competent certified
personnel.
•
Always observe the locally applicable safety
and environmental regulations.
•
Apply protective cream to the body, if
necessary.
•
Remain a safe distance from rotating and
moving components.
•
To prevent the risk of fire, the Cleanflow and
surrounding area must be free of flammable
fluids.
•
Wear clean protective clothing, goggles and
safety shoes when working on the Cleanflow.
•
Follow all safety and warning regulations
provided in this manual!
Lock Out Tag Out (LOTO)
Lock Out Tag Out (LOTO) is an internationally agreed safety procedure to make sure that dangerous
machines are properly shut off, and that they cannot be started again prior to the completion of
maintenance or repair work.
The Cleanflow is prepared for LOTO, Goudsmit recommends use of the LOTO procedure for every
activity performed on the SRCP.
This will reduce the risk of personal injuries.