Gotting HG G-76343, Manual

Page: 86 / 114

Device Description HG G - 76343/4/5 | English, Revision 05 | Date: 23.02.2022
86 Chapter 10 – Configuration with USB Memory Stick
Figure 69
USB-Config-Stick: MC-Config Init with USB Stick Config
This command
formats
the USB memory stick (ext4 format) and creates certain
files, which make this special stick recognizable as a config stick. One of these files
is the config file currently available on the radio modem. After transferring the files,
the radio modem is restarted.
During the boot process, this stick is then recognized as a config stick and the config
file stored there is used for further operation. It is designed so that the USB stick al
-
ways remains plugged into the HG G - 76343/4/5. This ensures that a change of the
configuration takes place in the Config-Stick as well as a change of the HG G - 76343/
4/5 firmware is also stored on the USB stick. Thus, another HG G - 76343/4/5 that is
started with this Config-Stick will have the same function as the radio modem from
which the Config-Stick was removed.
If you want to use the HG G - 76343/4/5 again without a Config-USB memory stick,
you have to reset the radio modem via the Reset button to its Factory Default (s. 3.4
on page 16).
NOTICE
Possible Dataloss
When the USB memory stick is initialized, all data on the stick is deleted.

Make sure there is no data that is still needed before initializing the USB stick.
If the USB stick is removed, the radio modem makes a reset very soon. The follow -
ing boot process is stopped until a Config USB memory stick is detected. Until
then the radio modem remains blocked! This state is signaled with a blue flicker of
the power LED.