76343/4/5 | English, Revision 05 | Date: 23.02.2022
66
Chapter 7 – Wireless (WLAN Interface)
7.3 Wireless SSID Profile
With firmware 2.09 and higher it is possible to define several WLAN SSID profiles.
This can be used to configure the radio modem to switch between different WLAN
areas with different SSIDs without intervention.
Each WLAN profile defines its own parameters for:
SSID
Encryption (WPA/WPA2)
PSK
802.1x (EAP parameter incl. User + Passwort)
The 802.1x certificates ( User) are valid for all profiles.
7.3.1 SSID Profile
7.3.2 Profile Change Action
This option is only relevant if the DHCP function is active. This is used to determine
what must be done when the SSID profile is changed.
Table 38
Wireless (WLAN Interface): SSID profile parameters
Parameter
Value
Function
SSID
1-32 char.
This is the network name of the WLAN. This is specified by the
AP (WLAN system) in the
Infrastructure
mode.
Priority
1 – 10
This value has only a meaning, if several SSID profiles are
active. The priority determines, which profile is preferred to
connect to a WLAN. The value 1 means the lowest priority.
Table 39
Wireless (WLAN Interface): SSID profile change action
Parameter
Value
Function
DHCP
Renew
Rebind
Restart
This setting determines how the radio modem behaves in rela
-
tion to the active DHCP client when switching to this profile.
–
With
Renew
or
Rebind
it is assumed that the same DHCP
server is responsible for both profiles and the already
assigned IP can still be used.
–
Restart
restarts the DHCP procedure immediately to get a
new IP address.
