Gotting HG G-71450-A, Manual

Page: 44 / 78

Device Description HG G-71450/1/3/5-A | English, Revision 02 | Date: 06.06.2019
44
Chapter 7 – Interfaces: CANopen® (HG G - 71453)
Table 55
HG G-71453: Manufacture Parameter
Index Sub Index Name Type Attr. Map Default Description
2000 00 number
of
manufacture
parameter Unsigned 8 RO No 0x02 No. sub indices
01 Prog_
transponder Unsigned 16 RW No 0 Transponder code
that is to be pro
-
grammed *)
02 Clear code Unsigned 8 WO No ./. Delete last transpon -
der code **)
*) By setting sub index 1 to a 16 bit code this code will be programmed into a transponder within the
reception range.
**) By writing the signature "c" in ASCII code (hex-Code: 0x63) to sub index 2 the last stored transpon
-
der code is „deleted“. Afterwards a transponder with the same code can again generate a positioning
pulse.