Gotting HG 76342-A, Device Description

Page: 14 / 23

WEB Interface
HG 76342-A
English, Revision 01, Date: 27.01.2014 14
3.1.3 WLAN-Info
Figure 10
Screenshot WLAN-Info
Info Note
Country setting Because there are country depending rules to use WLAN the user has to select
the country where the device will operate. If the Option IEEE802.11d is active, the
country specific settings will be received from the AP (if possible). If the device
received this information, the country setting is marked with „(802.11d)“
Network mode 2 Modes are supported:
Infrastructure

The device will connect to APs
Adhoc

The device will work in a point to point network
Phy mode The following modes are supported:
802.11 bg

2.4 GHz Band with 11 or 54 MBit max.
802.11 g

2.4 GHz with 54 MBit max.
802.11 b

2.4 GHz with 11 MBit max.
802.11 a

5 GHz with 54 MBit max.
SSID This is the „Service Set Identifier“, that's the name of the wireless network
MAC-Addr. of AP If the device is connected to an access-point the MAC address of this access-point
is shown here.
Current transmit
rate This is the actual used transmit rate that the WLAN card uses to transfer data
Current channel The used channel is given by the access-point.
Current link state When the connection to the access-point is completed the status info
Connection established
is shown. A status message with red letters signals an unconnected status.
Table 6
Info Page - WLAN-Info (part 1 of 2)