18
（
Figure
16: turn on WIFI）
2.
Get the WIFI password.
A few seconds, there appear
‘ SSID: Andonstar-******* & WPA2
：
12345678’ on the top of the display .
（
Figure
17: WiFi ID & WPA2
）
3.Turn on WIFI setting on the cell phone or tablet
，
connect the corresponding microscope WIFI
（
Andonstar-********
）
. If connected successfully, the font "Connect" will be displayed in red on the
screen.
4.Turn on APP (“My Measure APP”) on the phone
，
touch“+”to add the microscope device.
5.Choose the corresponding WiFi of microscope
（
Andonstar-********
），
then enter the password
：
12345678. If connected before, the connection history would be saved in the camera list. You could
