background image

1. You will want to start riding your electric scooter with one foot on the 

platform and one foot on the ground. Use your foot on the ground to push 

off and at the same time, press the throttle button to begin movement. 

2.  Press the handbrake to slow down or stop.

3.  The scooter performs best when on a smooth surface e.g. carparks, 

smooth roads, footpaths, & bike lanes. 

4.  Always clean your scooter (wheels, platform, etc.), it’s a machine and it 

needs to be maintained. See maintenance page. 

5.  Do not press the throttle while walking with the scooter beside you.

6.  Be aware of the terrain you are riding on, watch out for curbs and 

obstacles!

7.  Use the red button to change between gears as you would on a bike, 

cycle  through  them  according  to  the  terrain  and  elevation.  First  gear 

equals  more  torque  for  going  uphill,  Second  gear  is  more  speed  for 

straight aways. 

8.  Cruise Control: To activate the cruise control press the right-hand throttle 

down for 10 seconds. To deactivate the cruise control press either the 

right-hand throttle or handbrake to deactivate the cruise control.

RIDING TIPS

Summary of Contents for GXL V2 HANDBRAKE EDITION





















Reviews: