![background image](http://html1.mh-extra.com/html/gotrack-tracking/vt390/vt390_user-manual_2247480009.webp)
GPS
Tracker
User
Manual
7. Set SMS for GPRS tracking
7.1 Set ID by SMS
Command: W<password>,010,ID
Description: every tracker has a unique ID. Tracker ID must be less than 14
digitals
Example:
SMS send: W000000,010,20131005
Meaning: this tracker’s ID is 20131005
7.2 Set APN by SMS
Description: W<password>,011, APN name, APN username, APN password
if no username and password required, just put in APN name only.
Command: W<password>,011,APN name,APN username, APN password
7.3 Set IP Address and Port by SMS
SMS command: W<password>,012,<IP>,<port>
Example:
Our online tracking website’s IP address is 183.90.184.58 port is 8500
SMS send: W000000,183.90.184.58,8500
We support domain name instead of IP address:
Example: W000000,012,www.ftracking.com,8500
7.4 Enable GPRS Function
Command : W<password>,013,X
Description: X=0, close GPRS (Default)
X=1, enable TCP
7.5 Set Time Interval for Sending GPRS Packet
Command : W<password>,014,XXXXX (When ACC OFF)
W<password>,044,XXXXX (When ACC ON)
Description: XXXXX should be in five digitals and in unit of 10 seconds.
XXXXX =00000, to disable this function
XXXXX =00001~65535, time interval for sending GPRS packet and
in unit of 10 seconds
8. Installation
8.1 Install I/O Cable
The I/O cable is a 16-pin cable including power, analog input, negative/positive
input and output.
- 9 -
Summary of Contents for VT390
Page 14: ...GPS Tracker User Manual 14...