#730#sampling interval (0 or
15-65535 seconds)#number of
pieces of data uploaded (0 -10)#user
password##
Set the timed data uploading function
The factory-set uploading interval of the product is 30, and under this
circumstance, the timed uploading function is turned on. The user can change
the parameter according to his needs.
e.g.: #730#20#4#0000##
Description: “20” refers to point sampling every 20 seconds, and the
positioning information will be uploaded after point sampling 4 times, that is,
the uploading interval is 20*4=80 seconds. The user can change the
parameter according to his needs.
Note: The user can send the instruction #730#0#1#0000## to turn off the
GPRS, so as to enter the power saving mode.
#770#new password (4 digits) #old
password (4 digits)##
Change the user password
Description: After the instruction is executed, the terminal will change the
user password according to the user’s requirements. After successful setting,
“&770&CONFIG OK&&” will be returned to the phone; if the password is
wrong, “&770&PASSWORD ER&&” will be returned.
e.g.: #770#1111#0000##. After the instruction is executed, the user
password changes from 0000 to 1111.
#801#letters or numbers (0-20
digits)#user password##
Change the user name
Description: After the instruction is executed, the user name of the terminal
under the GPRS mode will be set according to the requirements. After
successful setting, “&801&CONFIG OK&&” will be returned to the phone; if
the password is wrong, “&801&PASSWORD ER&&” will be returned.
e.g.: #801#13900139000#0000##
#802#APN (letters or numbers, 0-32
digits)#login user name (letters or
numbers, 0-20 digits)#login
password (letters or numbers, 0-20
digits)#user password##
Set the APN
Description: After the instruction is executed, the terminal APN under the
GPRS mode will be set according to the requirements. After successful
setting, “&802&CONFIG OK&&” will be returned to the phone; if the password
is wrong, “&802&PASSWORD ER&&” will be returned.
e.g. 1: #802#CMNET###0000##. After the instruction is executed, the
terminal APN is CMNET, the login user name and password are blank.
e.g. 2: #802#CCDLEN#Guest#Guest#0000##. After the instruction is
executed, the APN is CCDLEN, the login user name is Guest and the login
password is Guest.
Note: The default APN of this product is CMNET.
