TROUBLESHOOTING
Phenomenon
Cause
Troubleshooting method
The running machine
stops suddenly
1.
Whether the power plug is
inserted properly.
2.
The quantity of materials put
into the machine is too much
3.
Hard fruits and vegetables
are not cut.
4.
Continoues working time more
than 20 Mins.
1.
Make the plug inserted into the
socket.
2.
First, press “R” for 2-3s to make
the materials return upwards; then
choose function button and start
again(repeat
the process for about 3 times).
If the machine still does not run
please clean the machine and then
use it.
3.
Hard fruits and vegetables (such
as carrot) shall be squeezed after
being cut into
strips.
4.
Cool the machine about 20 Mins
and restart it if need.
The juice amount is
small
Materials stored in refrigerator
too long before squeezing.
1.
The juice amount will be
increased if the materials are
squeezed after being immersed
in clear water for sufficient water
absorption.
2.
Use fresh fruit.
Juice flows out of the
mainframe
The rubber pad at the bottom
of squeezing cup is not
installed properly.
Please reinstall the squeezing rubber
pad by
referring to the installation method.
There is abnormal
noise
1.
Accessories are not properly
installed.
2.
The machine is put on
oblique
ground.
3.
Parts cause extrusion sound
during squeezing.
1.
lnspect whether the accessories
are properly installed after the
machinestops.
2.
Please put the machine on a
plane.
3.
The sound caused by extrusion of
fruits and vegetables, and please do
not worry about it.
The container and
accessories are dyed
after use
1.
Dreg attaches to the
container
2.
The container and
accessories are liable to be dyed
when materials with pigment
(such as carrot, spinach, etc.)
are used for
squeezing.
1.
Clean the machine in time after
use
2.
Clean the machine with detergent
after use.
13
