-LFO 1 and 2
: The LFO's waveforms are continuously variable from triangle to saw to square to pulse. The LFO's can
be both wave and rate-modulated, using any modulator. Both LFO's can also be key-synced, and LFO wave start-point
can be adjusted.
-Random Voltage
: Each time it is triggered, it outputs a new random value. Trigger sources are: LFO1, LFO2 or key.
-Random Pulse
: A squared version of the random voltage with adjustable pw. When the random voltage puts out a
value above the pw, the output of this will be zero. When the random voltage puts out a value below the pw, the output
of this will be max.
-Mod Keyboard
: The last received note on value are converted to a control level, using to parameters: Offset (at what
note value, will the modulation start) and spread (makes the control curve more steep, at higher values).
-Velocity
: The last received note on velocity value.
-Envelope follower
: The audio signal present on the external audio input converted to a controller shape. With
adjustable smoothing.
-MIDI Controller 1-4
: The last received values from these four controllers or from edit knob 1 (ctrl 2) or 2 (ctrl 3). If
edit knob 1 and 2 are assigned to a parameter in the assign section, MIDI controller 2 and 3 will also be assigned to
these, and ignored as modulation sources.
MIDI CONTROL
Anamono receives note on's and off's and program change on the selected midi-channel. The oscillators also receives
pitch-bend data. MIDI controller 32 selects program bank (0 or 1), MIDI controller 1 and 4 are routable to all
parameters, that can be modulated, MIDI controller 2 and 3 are routable to any parameter (together with edit knob 1 and
2), MIDI controller 65 selects between primary and secondary controller set, and the rest of the MIDI controllers
between 5 and 119 are hard assigned to a parameter (see parameter list). All parameters can be controlled using NRPN
controller numbers (again: see parameter list).
THE USER INTERFACE
Anamono's user interface are very simple: One volume knob, two edit/controller knobs, an encoder with click switch
and a play/enter pushbutton with blue LED. In edit mode, the two edit/controller knobs edits two parameters at a time,
on the selected edit page. In sound select mode, they transmits midi-controller 2 and 3 internally to the parameters,
where these controllers are selected as modulation source, or they adjusts the parameters, they are assigned to, if they
are that. The encoder selects sound and navigate around in the edit pages plus it adjusts some switch-functions on some
edit pages.
GotharMusic