Gotharman deFormer, Manual

Page: 15 / 73

15
The 16 step knobs, selects a velocity value for step 17-32. The last selected velocity value are
showed in the lower right corner of the display.
The 16 step knobs, selects a controller value for step 1-16. The last selected controller value are
showed in the upper right corner of the display.
Edit knob 3 (the encoder) adjusts what controller number you want to control. This number is
shown on the upper left of the display. Every time you change the controller number, the
Enter/Exit/Save button will start to blink, and you will have to push it to confirm.