Installation
.
Charge goTenna PRO fully before initial operation via the micro‐USB port
found at the bottom of the device. Device light will pulse white while
charging, and will remain solid white when fully charged.
.
Install goTenna app on to smart phone.
.
Press, hold, and release the button to turn on the device. It will flash white
one time to indicate it is on.
.
Follow pairing instruction inside phone app to pair to goTenna PRO. Light
will flash a solid white for seconds once pairing is successfully completed.
.
If you ever need to pair goTenna PRO with a new phone, simply press pair to
new devices button inside the phone app to make the device capable of
pairing with a new host device.
Operation
.
Follow on‐boarding instruction inside app to set up your goTenna contact
number. This is recommended to be your phone number.
.
Proceed to text, share GPS location, or send other data over the app using
regular text‐messaging app conventions. For more help please visit our FAQ
online at www.gotenna.com/faq
.
We recommend placing the goTenna PRO in a unobstructed position,
preferably as high up as possible on your person. For example, goTenna will
work best when attached externally to the upper back of a backpack using
the provided attachment strap.
Legal
Notices
FCC
Interference
Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an output on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
