Assembling the desk
Remove all the components from the box taking care not to damage any. The legs are heavy and can chip paint
from the other parts if they are brought together. Ensure that you have all the screws and fastners listed.
1. Take the support beam and braket and set them to the desired length to suit the size of the desktop.
2. Fit the two legs to the beam and bracket using the
4. Insert the hexagonal drive rod(bar) into the gears on
the legs. Check the rod is inserted completely and then lock
up the fixing sc
rews. Also insert the handle and drive rod
into the gearbox. The length of this will need to be
adjusted either now or later so that the handle comes out to
the edge of the desk.
key provided.
5. Place the desktop onto the assembled sit-stand frame and
screw the top to the frame with the self-tapping screw
s 12 off 4.8 x 19
provided. Eusure the top is the correct way up and centered
befor
e fixing in place.
GoStand Series 2 manual Sit-Stand desk
www.gostand.co.uk
For help email: [email protected] Page 4 of 5
Now the desk is almost ready to use. Adjust the feet and make sure the desk is stable and away from all
obstacles. Ensure nothing can obstruct the rise and fall of the desk.
