GMC-I Messtechnik GmbH
19
7
Parameters Configuration and Operation
Information regarding parameters configuration and operation of the
R6000 is included in the comprehensive operating instructions.
These are available from the internet at www.gossenmetrawatt.de.
Read the operating instructions completely and carefully before using the
device, and follow all instructions included therein.
The operating instructions should be made available to all users.
8
Maintenance and Service
The R6000 controller does not require maintenance at regular inter-
vals.
If the controller should nevertheless require replacement, it can be
removed from the rail by pulling on the tab at the bottom of the device.
This disengages the top-hat rail mount and the controller can be
removed by lifting it up and forward.
Before replacement, the DIP switches at the replacement device must
be configured to match those at the original device (bus address and
selection of Pt100 or thermocouple).
The replacement device is attached to the top-hat rail with the mount-
ing hooks at the rear, and is snapped into place by gently pushing
down and back.
Screw or clamp-type terminal blocks can plugged from one device to
the next for quick device replacement if service is required.
