manualshive.com logo in svg

Gossen MetraWatt PROFITEST H+E EASY CHECK, Operating Instructions Manual, Page: 16 / 28

Share
Download
Gossen MetraWatt PROFITEST H+E EASY CHECK Operating Instructions Manual Download Page 16

13

PROFITEST H+E EASY CHECK

Gossen Metrawatt GmbH

Available navigation options for the current step are displayed at the screen. Press 
the corresponding function key on the membrane keypad in order to display 
options or trigger the desired action.

• Press 

ON/OFF

 in order to switch the instrument on or off.

• Press 

Up/Down

 in order to scroll forwards or backwards through available menu 

options.

• Press 

START/STOP

 in order to confirm a menu selection.

• Press 

OK

 to trigger an action.

• Press 

ESC

 to abort an action.

8

Initial Startup

8.1

Unpacking the Instrument

1. Carefully remove the instrument and its accessories from the packaging.
2. Check for completeness and possible damage.
3. If any damage, hidden defects or missing items are detected, contact the man-

ufacturer or you dealer without delay.

4. Retain the packaging materials for future use.

8.2

Power Supply

The instrument is powered by an internal rechargeable battery. The internal battery 
is charged by means of a mains power pack.

Battery Charge Level

The battery charge level is displayed briefly after switching the instrument on. If the 
battery charge level drops to below a certain value during operation, a message is 
displayed at the screen.

Summary of Contents for PROFITEST H+E EASY CHECK





























Reviews:

No comments