8
Gossen Foto- und Lichtmesstechnik GmbH
1
Initial Startup
The MAVOSPEC BASE works with an interchangeable micro SD card for measured
value storage and a device-specific, rechargeable lithium-ion battery.
Use only the original V070A GOSSEN rechargeable battery included with the meter,
or available as an optional accessory, and the USB charger.
Wait until your MAVOSPEC BASE has been shut down.
Unlock the lid at the back of the meter with a Phillips head screwdriver, remove it
and pull it down and away.
1.1
Inserting the Memory card
Remove the rechargeable battery from the battery compartment.
Pull the micro SDHC memory card out of the included adapter.
Insert the micro SDHC memory card into your MAVOSPEC BASE in
the recess provided for this purpose in the battery compartment.
Push the card into the slot in the meter in the indicated direction.
1.2
Inserting the Rechargeable Battery
Insert the battery into the compartment as shown in the figure. Make sure
that the + and
– poles are correctly connected!
Close the battery compartment lid and secure it with the screw.
Remove the lid.
Unlock.
Insert battery.
!
The MAVOSPEC BASE can also be operated without a memory card
–
all measuring and display functions are still available and only measured value
storage at the meter is excluded.
Pull Micro SDHC
card from adapter.
Insert micro SDHC card
und push into the slot.
Lock.