manualshive.com logo in svg

Gossen MetraWatt ECUTEST ST BASE, Condensed Operating Instructions, Page: 22 / 56

Share
Download
Gossen MetraWatt ECUTEST ST BASE Condensed Operating Instructions Download Page 22

SECU

TEST ST 

B

ASE

(

10

) / 

P

RO

 

and SECU

LIFE ST 

BASE

(25)

22

Gossen Metrawatt GmbH

10

Inspector Management

The test instrument is equipped with inspec-
tor management under 

Setup 2/3

 > 

Inspec-

tors

. You can set up several inspectors and 

switch amongst them.
The “active” (selected) inspector appears in 
completed tests as the “Inspector”: tests are 
saved under the inspector’s name and can 
thus be allocated unequivocally to the 
inspector. Upon delivery (default setting) the 
inspector is set up in the test instrument as 
“not defined”.

Note

Create new users and delete the “not 
defined” default user for security rea-
sons.

Note

Test instrument settings are valid for 
all inspectors. Separate settings are 

not

 saved for the individual inspec-

tors.

A complete description of inspector man-
agement is included in the full operating 
instructions.

Adding an Inspector

Setup 2/3 > Inspector > New Inspector
See section 8.1 regarding data entry. The 
inspector is added by pressing the green 
checkmark.

Password Protection

Select the inspector to be edited from the list 
under Setup 2/3 > Inspector > Edit Inspec-
tor, and confirm by pressing the softkey. A 
password can be assigned to the inspector 
using the “Create Password” option. See 
section 8.1 regarding data entry. The pass-
word is assigned by pressing the green 
checkmark.

Deleting an Inspector

The currently selected inspector cannot be 
deleted. In order to delete, first select 
another inspector. Then select the inspector 
to be deleted under Setup 2/3 > Inspectors 

> Edit Inspectors > Delete Inspectors.
The inspector is deleted by pressing the 
green checkmark after acknowledging a 
security prompt.

11

Internal Database

11.1 Creating Test Structures

A complete test structure with data regard-
ing customer properties, buildings, floors, 
rooms and test objects can be created in the 
test instrument. 

Attention!

!

Sensitive Data – Mandatory Data Protec-
tion!

Customer data are sensitive data 
which have to be protected. 
Observe and comply with the re-
spectively applicable national data 
protection regulations. Use the corre-
sponding functions provided by the 
test instrument such as password 
protection (see section 10), as well 
as other appropriate measures.

This structure makes it possible to save the 
results of single measurements or test 
sequences to test objects belonging to vari-
ous customers.
Up to 50,000 data records can be stored in 
the test instrument. The following applies in 
this regard: 1 data record = 1 DUT or loca-
tion node or customer or individual measure-
ment.
Structures can be created directly at the test 
instrument or at a PC (IZYTRONIQ software), 
and then transferred accordingly. They can 
also be saved to and restored from a USB 
flash drive.

Note

The scope of functions provided by 
the database structure and the trans-
fer options depend on the instrument 
variant and its features.

A complete description of database creation 
is included in the full operating instructions.

Summary of Contents for ECUTEST ST BASE

























































Reviews:

No comments