You do not need to use the In-Line Wire Connectors.
can
wired directly to the reverse light circuit by stripping the reverse light
wires then twisting GT4062 wires to the exposed reverse light wires.
Once connected, wrap with electrical tape. Do not attempt this if you
are not knowledgeable with electrical installation practices.
GT4062
be
-8-
In-Line Wire Connector Instructions
Insert the existing
wire to be tapped.
Insert the wire to
be attached.
Crimp tap then
close lock
4-2:
12/24 Volt
Cigarette Lighter Adapter
Using
age
and
2 4GHz wireless Receiver Gt4013
.
1. Plug the end of the power cable into the
.
electric equipment
3. Plug the 12/24 V car power adapter into
car power socket.
4. The monitor or GPS will be automatically activated when you back up the car.
The monitor will be automatically shut when t
goes forward.
he car
2.Plug the end of the AV cable into the AV
equipment
4-3 2.4GHz wireless Receiver Gb6904 using
1 Clamp the Gb6904 on a GPS
.
equipment
2 the GPS equipment will supply 5V voltage to the Receiver and
the Receiver can supply AV signal to GPS
.
.
3 The monitor of GPS
.
will be automatically activated when you
clamp the Receiver