16
If the electrodes or adapters are too deep
into the water, pour some water away. The
calculation of the production time is there-
by minimally affected.
5.
As a precaution, fix the supply cable with
tape on the table and make sure that the
device can not fall into the vessel.
6.
After you have previously made your
desired settings on the goSilver Plus, start
the electrolysis process. After a successful
water test, goSilver Plus starts and the
display changes to the status display.
Illustration only applies
to the goSilver Plus 8
Summary of Contents for Plus
Page 1: ...Manual goSilver Plus Plus 8 ...
Page 2: ......
