Battery:
The device includes an in built a 600mAh lithium battery. It will take about
90minutes to charge it completely in off state. The battery can be charged
when DVR is in operation. The working current is about 380mA for normal and
580mA for night vision operation.
On/Off and screen saver:
1.
Press the POWER button for 3 seconds to turn on/off DVR. The display will
show “Turning off…” when turned off.
2.
Press the POWER button can turn on/off the LCD display for saving energy.
Note: If the message “Turning off…” is not shown on the LCD display, just the
LCD display is turned off, not the device.
Date/Time Setup:
Press the “MENU” button to enter setup mode, press the “MODE” button to
bring up the setup menu. Pick “Date/Time” option, “Down”, “UP” buttons to
adjust the right date and time. Press “OK” button to confirm and activate the
settings.
