Gosafe skypatrol SP5600, User Manual

Page: 13 / 19

SP560 0
User Manual
13
Below will take user1 as example:
To set your cell phone number as User1 to control and receive messages from device, please send
UNO
command to the device, e.g.:
1234,UNO0;+8613912345678
Or
1234,UNO0;13912345678
Explanations:
1234
: Default password.
UNO0 : Command control word for setting user number.
+8613912345678
: Phone number with country code.
13912345678
: Phone number without country code.
Device is supposed to reply a confirmation SMS to you, if the device does not accept the command,
it also reply a message with content:
Command err
.
￭
Modify User Password
Factory default password
1234
Changing the factory password at the first usage is highly suggested.
New password should be 4 digits that from number “0-9”.
To modify password, send
UPW command from your USER phone number, e.g.:
1234,UPW0;5678
Explanations:
1234
: Factory Password
UPW0 : Command control word for setting new password
5678
: New Password
￭
Set position report interval to user phone
Device is able to report its current position periodically according to the setting, default is every 30
minutes. To change it please send
USP command, e.g.:
7. User Command
￭
Set User Phone Number
There are 2 users phone supported by SP560 0 , they have the same authorization.
User1’s command words are UNO0, UPW0, USP0 .
User2’s command words are
UNO1, UPW1, USP1
.