GORMAN-RUPP VG3B3-B, Installation, Operation And Maintenance Manual

Page: 1139 / 1180

JOB NAME:
DO NOT
SCALE
DRAWING
DRAWN BY: DATE:
DRAWING NAME:
TYPE:
SHEET: REV ERN / ECO DATE BY REVISION DESCRIPTION OF
JOB LOCATION:
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES
ANSI
FRACTIONAL DIMENSIONS +/- 1/16
ALL TWO PLACE DECIMALS +/- 0.010
ALL THREE PLACE DECIMALS +/- 0.005
WEIGHT:
DRAWING NUMBER: SIZE: SCALE:
D
C
B
A
D
C
B
A
8 7 6 5 1 2 3 4
1 2 3 4 8 7 6 5
AQUA-AEROBIC
SYSTEMS, INC.
Copyright 2013 Aqua-Aerobic Systems, Inc. All Rights Reserved. This Drawing May Not Be Copied All Or In Part Without The Express Written Permission Of Aqua-Aerobic Systems, Inc.
D MEMBRANE POWER PANEL INSTALLATION NOTES 9107150D7701 NONE
ULTRAFILTRATION MEMBRANE
DCT 2013-12-09
- 1 2
AUGUSTA CORRECTIONAL FACILITY
CRAIGSVILLE, VIRGINIA
B R14621 2014-04-01 DCT RELEASE TO MANUFACTURE
A - 2013-12-13 DCT SUBMITTAL
SUB-PANEL MOUNTED COMPONENTS = RECTANGULAR NAMEPLATE (WHITE WITH BLACK LETTERS)
DOOR MOUNTED OPERATOR DEVICES = STANDARD 30.5 mm RING TYPE NAMEPLATE (WHITE WITH BLACK LETTERS)
ENGRAVED IDENTIFICATION NAMEPLATE TYPES ARE AS FOLLOWS:
CONTROL PANEL TO BE UL 508A CERTIFIED.
WH OR W = WHITE (INFORMATION)
GN OR G = GREEN (MOTOR ON,VALVE OPEN)
RE OR R = RED (VALVE CLOSED)
AM OR A = AMBER (ALARM)
GROUND SYMBOL ( ) INDICATES ISOLATED GROUND BAR.
GROUND SYMBOL ( ) INDICATES COMMON GROUND BAR TO CHASSIS.
WIRE LABEL IDENTIFICATION IS TYPICALLY FOUR OR FIVE DIGITS LONG UTILIZING THE DRAWING AND
18 AWG SHIELDED TWISTED PAIR CABLE = ANALOG CONTROL CIRCUITS
DIAMONDS " " INDICATE COMPONENTS EXTERNAL TO THE CONTROL PANEL.
SOLID WIRING ( ) INDICATES WIRING INSTALLED BY AASI (AQUA-AEROBIC SYSTEMS, INC).
UNFILLED CIRCLES " " INDICATE TERMINAL STRIP TERMINATIONS SUPPLIED BY AASI.
FROM INDEX POSITION TO INDEX POSITION AS INDICATED.
REPRESENTS CONTINUATION OF WIRING AND/OR COMPONENTS.
AT THE LEFT EDGE OF EACH COLUMN OF SCHEMATIC.
DASHED WIRING ( - - - - ) INDICATES WIRING INSTALLED BY OTHERS IN FIELD.
UNFILLED SQUARES " " INDICATE TERMINAL STRIP TERMINATIONS IN JUNCTION BOX SUPPLIED BY AASI.
GROUND BAR. THE ISOLATED GROUND BAR SHOULD BE TIED WITH ONE WIRE TO THE MAIN GROUND BAR IN
GROUNDS FROM LOW VOLTAGE COMPONENTS AND ANALOG CABLE SHIELDS SHOULD BE TERMINATED ON AN ISOLATED
WHENEVER POSSIBLE LOW VOLTAGE DC WIRING SHOULD CROSS PERPENDICULAR TO HIGHER VOLTAGE AC WIRING.
REFERENCE NUMBER 215
REPRESENTS SHEET NUMBER OF ELECT SCHEMATIC
THE FIRST DIGIT OF THE LINE NUMBER ALSO
WIRE NUMBER 1 ON THAT LINE NUMBER
EXAMPLE: 2 1 5 1
LINE NUMBER OF THE POINT TO POINT WIRING DIAGRAM.
PILOT LIGHT COLOR KEY
F
MINIMUM SINGLE CONDUCTOR (COPPER) WIRE GAUGE SIZE
16 AWG STRANDED MTW = DIGITAL CONTROL CIRCUITS AND DC POWER
14 AWG STRANDED MTW = MOTOR POWER
THE ENCLOSURE.
WIRE COLOR CODE (SEE PROJECT SPECIFIC NOTES).
SCHEMATIC SYMBOL LEGEND
TO #
AND
FROM #
STANDARD NOTES:
ALL NAMEPLATES TO BE ATTACHED WITH 1/2" 3M SCOTCH ATG ADHESIVE TRANSFER TAPE 926 CLEAR UNLESS OTHERWISE SPECIFIED.
ISO
FOR CONTROL PANEL ASSEMBLY AND WIRING GUIDELINES SEE CONTROL PANEL WIRING SPECIFICATION ES-7014.
WIRE LABELS ARE WHITE VINYL SELF-LAMINATING THERMAL TRANSFER PRINTABLE TYPE.
LINE NUMBER OF THE POINT TO POINT WIRING DIAGRAM.
E
D
C
B
A
G
H
J
WHEN ROUTING CONDUIT TO THE CONTROL PANEL, AVOID TOP ENTRY INTO THE ENCLOSURE. TOP CONDUIT ENTRY PROVIDES A
AA
CRITICAL FIELD INSTALLATION NOTES:
POTENTIAL MOISTURE PATH TO ELECTRICAL DEVICES WITHIN THE PANEL. BOTTOM CONDUIT ENTRY IS RECOMMENDED. IF TOP
ENTRY CANNOT BE AVOIDED, KEEP AWAY FROM THE AREA DIRECTLY OVER THE PLC OR OTHER ELECTRICAL DEVICES.
FOR OUTDOOR INSTALLATIONS,AVOID MOUNTING THE ENCLOSURE WITH DOOR FACING A SOUTHERLY DIRECTION WHEN POSSIBLE. BB
SHORT CIRCUIT CURRENT RATING NAMEPLATE: 65kA RMS SYMMETRICAL @ 460VAC MAXIMUM.
PROJECT SPECIFIC NOTES:
1
YELLOW
BLUE w/WHITE STRIPE
BLUE
WHITE
GREEN
RED
BLACK
WIRE COLOR CODE
WHITE w/YELLOW STRIPE
ORANGE
WHITE w/ORANGE
= 230V OR GREATER 3 PHASE
= 115V 1PH
= 115V NEUTRAL
= (+) 24VDC, INDICATED ON WIRING BY "BLU" ON THE WIRE
= (-) 24VDC, INDICATED ON WIRING BY "B/W" ON THE WIRE
= GROUND, INDICATED ON WIRING BY "G" ON THE WIRE
= POWER FROM REMOTE SOURCE, INDICATED BY "YEL" ON THE WIRE
= NEUTRAL FROM REMOTE SOURCE, INDICATED BY "W/Y" ON THE WIRE
= DC POWER FROM REMOTE SOURCE, INDICATED BY "ORG" ON THE WIRE
= DC NEUTRAL FROM REMOTE SOURCE, INDICATED BY "W/O" ON THE WIRE
2