5585-250-00
6
11/2016
Specifications Information and Repair Parts Manual
5585-B6, 5585-D6, 5585-H6, & 5587-Y6
x
6” Trash Pump
TRAILER GEAR
Routine Maintenance:
Routine maintenance is required on trailer equipment. Follow
guidelines listed.
1.
Lubricate ball coupling mechanism as required to ensure
smooth positive action.
2.
Apply light coating of lubricating grease to tow ball coupler.
3.
Inspect safety chains for wear; replace if required. Check
safety chain mounting bolt, torque to 20-25 ft. lbs. if required.
4.
Torque lug nuts to 85-90 ft. lbs. after initial use then after
every 250 miles.
5.
Torque tongue to frame mounting bolts (4 total) to 15-18 ft.
lbs. every 250 miles or monthly.
6.
Torque axle spring hanger to frame mounting bolts (4 total)
to 45-50 ft. lbs. every 500 miles or yearly.
7.
Torque axle U-bolts to 30-35 ft. lbs. every 500 miles or
yearly.
8.
Repack wheel bearing with NLGI Grade-2 wheel bearing
grease (Pennzoil 302 EP or equivalent) every 1000 miles or
yearly.
EVAPORATIVE EMISSIONS CONTROL
INFORMATION
(Pertains to gasoline fuel only)
Maintenance
1.
Periodically check fuel lines, vent lines, fittings, fuel tank, and
tank cap for damage or leaks. Clean as needed. Replace
any leaking or damaged parts with direct factory
replacements or identical EPA certified equivalents.
2.
Replacement fuel lines must have the same SAE rating.
Fittings must be same type and material. Use factory
replacement fuel tank. Tank cap must be metal non-venting
type.
Warranty
These warranty statements apply solely to the evaporative emissions
equipment installed on the unit; fuel tank, fuel tank cap, fuel line, tank
vent line, fittings, and valves. For warranty information pertaining to all
other
parts
see
the
general
AMT
warranty
at
http://www.amtpump.com/products/PDF/warranty.pdf
directly for a printed copy.
1.
The evaporative emissions equipment on gasoline fueled
pumps is designed, built and equipped to conform to current
EPA requirements. They are warranted to be free from
defects in materials and workmanship.
2.
Warranty coverage may be denied if a part has failed due to
abuse, neglect, improper maintenance or unapproved
modifications.
3.
Warranty period is two years from point of first retail sale.
4.
Any warranty claim concerning the evaporative emissions
equipment must be directed to the person who last sold the
pump, a local distributor, or directly to American Machine
and Tool Co. Inc. of PA (AMT).
5.
Any part deemed to be defective by AMT will be replaced at
no charge and shipped directly to the end user or distributor
for replacement. AMT may require the end user to first return
the part in question for inspection before replacement parts
are shipped.
Summary of Contents for AMT 5585-B6
Page 16: ......
