GORMAN-RUPP 62-1/2E13-4A084, Technical Manual, Page: 56 / 107

pump, it is more easily disassembled while
mounted on and connected to the engine (par.
3-23).
a. Removal.
—
(1) Remove the control panel (par. 3-12).
(2) Refer to figure 3-11 and remove the pump from
the skid and engine,
b. Cleaning and Inspection.
Clean the exterior of the pump with a cloth
dampened with an approved cleaning solvent;
dry thoroughly.
Inspect the pump for cracks, broken castings,
damaged fittings and threads, and other damage.
Manually turn the pump shaft to check for free
rotation. It should turn freely without binding or
scraping. Repair or replace pump if necessary.
c. Installation.
—
(1) Refer to figure 3-11 and install the pump.
(2) Install the control panel (par. 3- 12).
3 - 2 1 .
ENGINE
a. Removal.
( 1 )
( 2 )
( 3 )
R e m o v e t h e p u m p ( p a r . 3 - 2 0 ) .
R e m o v e b a t t e r y c a b l e f r o m
p l u s ( + ) t e r m i n a l , d i s c o n -
n e c t f u e l l i n e a t t h e f u e l
t a n k .
R e f e r t o f i g u r e 3 - 1 2 a n d
r e m o v e t h e e n g i n e .
b .
I n s t a l l a t i o n
( 1 )
( 2 )
( 3 )
R e f e r t o f i g u r e 3 - 1 2 a n d
i n s t a l l t h e e n g i n e .
R e c o n n e c t t h e f u e l l i n e
a n d p l u s ( + ) b a t t e r y c a b l e .
I n s t a l l t h e p u m p ( p a r . 3 -
2 0 ) .
Figure 3-12. Engine, removal and installation.
3-12