GORMAN-RUPP 62-1/2E13-4A084, Technical Manual, Page: 38 / 107

b . Gages are provided on the pump control panel
for monitoring the engine oil pressure and engine
speed.
c . The suction connection is made to the pump at a
2-l/2-inch threaded female port. The discharge con-
nection is made at a 2-1/2-inch threaded female port
at the check valve.
1-3. IDENTIFICATION AND TABULATED DATA
a . Identification. The Centrifugal Pump, Model 62-
l/2E13-4A084, has three major identification plates.
The information contained on the plates is listed
below.
(1) Engine plate. (U.S. Army Mobility Equipment
C o m m a n d )
ENGINE, GASOLINE
MILITARY STANDARD
4-CYLINDER, AIR-COOLED
4-CYCLE, OVERHEAD VALVE
84-CU-IN. DISPLACEMENT
STOCK NO. 2805-872-5972
SERIAL NO.
MIL MODEL 4A084-III
MANUAL TM 5-2805-259-14 & -24P
(2) Performance plate. The performance plate pro-
vides performance characteristics of the pump.
(3) Pump plate.
Manufacturer . . . . . . . German-Rupp Company
Model . . . . . . . . .
Serial No.
. . 62-1/2E13-4A084
b. Tabulated data.
(1) Centrifugal pump.
Manufacturer . . . . . . . German-Rurm Company
Model . . . . . . . . . . . .
62-1/2E13-4A084
Type . . . . . . . . . . . . . . .. Centrifugal
Serial number . . . . . . .
392630 through 392765
Fuel tank capacity . . , . . . . . . . . . 11 gal.
(2) Engine.
Refer to engine manual, TM 5-2805-259-14.
(3) Nut and bolt torque data.
Intermediate bracket screws . . . . 15 to 20 ft-lbs
Hoisting bracket screws . . . . . . 15 to 20 ft-lbs
Spline coupling screws . . . . . . 15 to 20 ft-lbs
(4) Control panel wiring diagram.
Figure 1-3 shows the control panel wiring dia-
gram for the centrifugal pump.
1-4. DIFFERENCES IN MODELS
This manual covers only the centrifugal pump,
model 62-1/2E13-4A084. No known unit differences
-
exist for the model covered by this manual.
1-2
Figure 1-3. Control panel wiring diagram.