96
MDE-LEDI-NETWORK-TDS-4099V3.0
8.3. OUTPUT CARDS ADDRESSES SWITCHES
Each
LEDI
®
NETWORK TDS
output card has an address which must be unique. These
addresses are determined by switches on each output card. When replacing/adding a new
card, the user must ensure that the cards’ addresses are unique.
Below
is a recapitulative table of the addresses depending on the switches’ positions:
Output 1
(closest to the
power supply
card)
Output 2
Output 3
1 output
2 output
3 output
►
Switches are read in a binary format. Each switch is a power of 2
