Gorenje WS967LN Instructions Manual Download Page 47

Page: 47 / 76

679937

STEP 6: STARTING THE WASHING PROGRAMME

Press the (3)

START

/PAUSE button.

Selected

WASHING MODE

TEMP.

(WASHING TEMPERATURE),

SPIN

(SPINNING RATE/

DRAIN/PUMP STOP) and

TIME REMAINING TO THE END OF PROGRAMME

START DELAY

(if selected) are indicated on the display unit.

Symbols will be lit on the selected functions.
After pressing the (3) START/PAUSE button, the spinning rate can be adjusted (except in the case
of the Steril tub (Self-cleaning programme) and

SPIN

(SPINNING RATE/DRAIN/PUMP STOP)) and

child lock can be activated or deactivated, while other settings cannot be changed.

If anything is flashing on the display unit, the washing machine door is open or not closed

correctly. Close the washing machine door and press the button (3)

START

/PAUSE again to resume

the washing programme.

679937en.indd 47

8. 03. 2021 09:31:55

Summary of Contents for WS967LN













































































Search results

Summary of Contents for WS967LN

Reviews:

Related manuals for WS967LN

Brands by name

Popular brands

Gorenje WS967LN, Instructions Manual

Search results

Summary of Contents for WS967LN

Reviews:

Related manuals for WS967LN

Brands by name

Popular brands